Click here to Print the Page





Cylindrical cased axial flow flameproof fans
TGT ATEX Series

TGT/6-800-9-II2GExeIIT3-50Hz


ATEX TGT
ATEX versions available for 3 phase models.
For ambient working temperatures from -20ºC to +40ºC.
- ATEX Flameproof - Gas
II 2G Ex d IIB T4
II 2G Ex d IIB+H2 T4 (with motor Ex d IIC T4)
- ATEX Increased safety - Gas
II 2G Ex e II T3
- ATEX - Dust
Combustable flyings and non-conductive dust:
II 3D Ex tc IIIB T125ºC
Conductive dust:
II 3D Ex tc IIIC T125ºC ( with motor IP65)
* TGT ATEX Flameproof models 400 and 450mm diameter only available long case LP version.
** TGT ATEX Flameproof models 500 to 1250mm diameter available short case and long case version LP (not available version K or L).
To select TGT ATEX refer to performance curves for THGT, or Easyvent. Note electrical data may vary for ATEX motors."


TGT/6-800-9-II2GExeIIT3-50Hz



Range of cylindrical cased axial flow flameproof fans. Casings formed from rolled sheet steel with a corrosion resistant hot dipped galvanised finish.
All models incorporate separate high grade diecast aluminium blades locked within a pressed sheet steel hub.
Suitable for horizontal or vertical mounting installation.
All models are available in both short and long (LP) casing versions.
Long casing versions include a large inspection door.

Motors
Available, depending upon the model:
- with three phase motors in 2, 4 or 6 poles.

All the motors are IP55, Class F insulation
Electrical supplies:
Three phase 230/400V-50Hz up to 3kW.
Three phase 400V-50Hz, for higher power motors and two speed motors.
(See characteristics chart).

Additional information
Standard air direction: form (B) configuration (impeller over motor).

On request
Air direction: form (A) configuration (motor over impeller).

+ Attributes

ATEX Long casing version LP"
Large inspection door fitted on Long cased models for ATEX versions, that enables access to the motor terminal box for electrical connection."

Explosion proof versions
Explosion proof versions in accordance to ATEX Directive

+ Technical characteristics

"

+ Reference

+ Dimensions

"

+ Curves

"

+ Mounting Accessories